IBM eServer 130 xSeries User Reference Manual page 24

Rear view
Ethernet 2 link
indicator (amber)
Figure 5. Identifying appliance server controls and indicators on the xSeries 130 model 8672
Ethernet 1 link indicator: This amber LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 1.
Ethernet 1 speed indicator: This green LED lights when the speed of the Ethernet
LAN that is connected to Ethernet port 1 is 100 Mbps.
Power-on light: This green LED lights and stays on when you turn on your appliance
server and it will blink when the appliance server is in standby mode. This light
duplicates the power-on light on the front of the appliance server.
System-error light: This amber LED lights when a system error occurs. This light
duplicates the system-error light on the front of the appliance server.
Ethernet 2 speed indicator: This green LED lights when the speed of the Ethernet
LAN connected to Ethernet port 2 is 100 Mbps.
Ethernet 2 link indicator: This amber LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 2.
10
IBM xSeries 130: User's Reference
Ethernet 1 link
indicator (amber)
Ethernet 1 speed
indicator (green)
Ethernet 2 speed
indicator (green)
System-error
light (amber)
Power-on light (green)