Table of Contents
Advertisement
Input/output connector locations
The following illustration shows the input/output connectors (ports) on the rear of
the server. For pin assignments and other details about these connectors, see
"Input/output ports".
Note: The illustrations in this document might differ slightly from your hardware.
Universal serial bus
Note: The ISM ports are dedicated for use by the system-management subsystem.
Input/output ports
The server has the following input/output (I/O) ports:
v One video port
v Two integrated system management (RS-485) ports
v One management port (not supported)
v Two Universal Serial Bus (USB) ports
v One Ethernet port
v One keyboard port
v One auxiliary pointing device (mouse) port
v Two serial ports
v Dual-channel Ultra160 ports (internal connectors only)
Video port
Your server comes with an integrated super video graphics array (SVGA) video
controller. This controller is not removable, but you can disable it by installing a
PCI video adapter.
Note: If you install a PCI video adapter, the server BIOS code will automatically
86
Hardware Maintenance Manual: xSeries 232, Type 8668
Serial A
Serial B
Mouse
Keyboard
Ethernet
(USB) 1 and 2
ISM-A and B
Management
(not supported)
Video
disable the integrated video controller.
DC
AC
GOOD
GOOD
Advertisement
Table of Contents
