Minolta Dimage Scan Multi2 User Manual page 73

• When scanning a B&W film, the Digital GEM function is not available.
• When using the Digital GEM function, be sure and perform the prescan and adjust a focus with
the Point AF or Manual Focus function (p.40 to 41) before the final scan. Putting a checkmark
on [Auto Focus at Scan] in the Preferences will be recommended.
• The Digital GEM function may not be obtained effectively depending on the conditions of the
film.
• A much more time is required for scanning when the Digital GEM function is turned on
compared with when that function is turned off.
8. Repeat steps 5 to 7 if necessary and
specify the Digital GEM adjust value
so that an appropriate correction
result can be obtained.
9. Click on
• The image that the film grain is corrected
according to the specified value (Digital
GEM adjust value) will be scanned.
• For the operations after performing the final
scan, see page 86.
– 73 –
DIGITAL ROC/GEM
.