Focus; Point Af - Minolta Dimage Scan Multi2 User Manual

PRESCAN

FOCUS

The Dimage Scan Multi2 uses the center of the image to focus. If the film is warped or curled, or
if [Auto Focus at Scan] is not checkmarked in the Preferences (p. 88), the focus should be
adjusted with the Point AF or the Manual Focus function.
The focus is determined by detecting the contrast in an image. Therefore, the focus
may not be adjusted appropriately in no contrast part (such as a white cloud or a
solid black subject).

POINT AF

The specified point in the prescan image can be focused automatically.
1. Click on in the Prescan window.
• The pointer will change to the Point AF icon.
• When the Point AF button click again, The
pointer shape returns to the original one.
2. Click on the area of the image to be
in sharp focus.
• Autofocus will begin, then a new prescan will
start.
– 40 –