Safety Precautions - Panasonic SD-P103 Operating Instructions Manual

Safety precautions

In order to prevent accidents or injuries to the user, other people, and damage to property, please follow the instructions below.
The following charts indicate the degree of damage caused by wrong operation.
Warning
The symbols are classified and explained as follows.
This symbol indicates prohibition.
Do not touch, block or cover the
steam vent during use.
Especially pay attention
to children.
It may cause
burns.
When abnormal incident or malfunction take
place, stop using the appliance immediately
and pull the plug out from the electrical outlet.
Otherwise it may cause smoke, fire, electric
shock or burns.
Abnormal
The power plug and the power cord become
or breaking
abnormally hot.
down
The power cord is damaged or power failure.
The main body is deformed or is abnormally hot.
The appliance makes abnormal turning noise
during use.
Unplug the appliance immediately and contact
the service centre for the check or the repair.
46
Indicates serious
injury or death.
In order to avoid
fire, burns and
electric shocks
Please make sure to follow these instructions.
Indicates risk of injury
Caution
or property damage.
This symbol indicates requirement
that must be followed.
Warning
Properly use the power plug and the
power cord.
Do not use the sockets and wiring devices
beyond their capacity. Do not use any power
supply other than 220V AC.
Because overheating may happen if the
rated power of multiple circuits is exceeded.
Do not damage the power cord and the power plug.
Do not damage, modify and approach hot devices.
Do not bend, twist, stretch, load or bundle
the cord in force.
Otherwise it may cause fire due to electric shock or
short circuit.
Do not use when the power cord is damaged
and the socket is loosened.
Otherwise it may cause fire due to electric shock
or short circuit.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified person in order to avoid a hazard.
Do not plug or unplug the power cord with
wet hands.
(It may cause an electric shock.)
Insert the power plug firmly.
Otherwise it may cause electric shock,
heating and fire.
Please clean away dusts on the power plug
regularly.
Take special care to see if the pins have too many
dusts on them. Poor insulations and fire will take
place due to moistures if so.
Unplug the power plug, and wipe with the dry cloth.