Locomotive Switch Locations - Lionel SD60 Owner's Manual

Locomotive basics

Locomotive switch locations

T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches. Note that available features (and switches) will vary by loco-
motive.
Smoke Unit Switch (MAIN SMK)
Used to turn the main smoke stack unit function on and off.
Program-Run Switch (RUN/PGM)
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation when
the switch is in the PGM position. Also used to "lock" your locomotive in a single direction, or
neutral, in conventional operation when the switch is placed in the PGM position.
Odyssey II Speed Control System Switch (ODY)
Used to turn the Odyssey II Speed Control System on and off.
Command reverse unit
switch
Figure 4. Locomotive switch locations
Front of Locomotive
Odyssey II On/Off
switch
Smoke unit On/Off
switch
8
Volume control knob
(located on frame
above the truck)