Trainmaster Command Control Operations; Cab-1 Remote Controller Numeric Keypad Commands; Setting The Smoke Level - Lionel SD60 Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller numeric keypad commands (continued)
Lowers the overall master volume of the LEGACY RailSounds sound system. To
independently adjust the level of the background sounds only (e.g., diesel roar and
brakes), tap AUX1 and then this key. Volume settings are retaining when track power is
turned off. Sound volume decreases.
Activates the LEGACY RailSounds sound system shutdown sequence when stopped.
Activates the emergency stop feature while in motion. Note that in the shutdown sequence,
the smoke unit will turn off if it was already on.
Enters manual RPM mode and lowers the LEGACY RailSounds diesel motor RPM level
(see page 18).
Dispatcher begins radio dialog, engineer replies (see page 17). TowerCom
announcement.
Turns off the smoke units. Air release sound.
Turns on the smoke units if the smoke unit's switches are in the ON position. Be sure to
add smoke fluid before turning on the smoke unit to prevent damage to your locomotive.
Air release sound.
Note! AUX1, 8 and 9 function only if the locomotive's smoke unit switch is in the ON position.

Setting the smoke level

Y
ou may adjust the level of smoke production using your Remote. Use the sequences below.
Low smoke production:
Medium smoke production:
High smoke production:
AUX2, 9, L, AUX2
AUX2, 9, M, AUX2
AUX2, 9, H, AUX2
21