Legacy Railsounds Sequence Control - Lionel SD60 Owner's Manual

Diesel locomotive
Hide thumbs Also See for SD60:
Table of Contents

Advertisement

LEGACY RailSounds Sequence Control

Y
our LEGACY-equipped locomotive features Sequence Control. Based on the movement and speed
of the locomotive, Sequence Control automatically plays the sound effects of an entire trip, from
departure to destination, while you run your locomotive. Prototypical horn signals, bell, and radio
chatter are added automatically as you spin your throttle—no need to memorize a sequence of but-
ton presses.
To activate the Sequence Control feature, press and hold the AUX1 button for three
seconds. You'll hear a unique bell/horn signal, indicating that Sequence Control is now
enabled. Release the AUX1 key when you hear the sound.
Now, radio chatter, air brake release, and warning signals will play automatically as you
move out, reach cruising speed, and then decelerate for arrival, as illustrated in Figure 6. Plus,
you can still activate CrewTalk communication and TowerCom announcements using your
remote.
To discontinue Sequence Control, you must tap AUX1, and then tap the 0 key or the
RESET button. Cycling track power off and back on also turns of Sequence Control mode.
During sequence control mode operation, speed step 1 is used to trigger departure
Note!
effects such are air brake release and departure horn. Therefore your engine will not
begin moving until speed step 2 and the Roll Mode button will bring your engine
to a stop while Sequence Control mode is enabled. For the most realistic operation,
medium or high momentum is recommended when using Sequence Control.
SEQUENCE CONTROL
ENABLED (hold AUX1 for 3
seconds) - Ding-ding-toot!
STOP - Bell
off. "We are in
position."/
"Copy.".
Figure 6. LEGACY RailSounds automatic Sequence Control
Automatic Sequence Control
The actual dialog will vary.
AT A STOP, after a long
pause - "Dispatcher, we
have a clear signal."/ "Roger
that."
SLOW BELOW
1/8 THROTTLE -
Bell on.
THROTTLE UP TO STEP
1 - Air brakes release,
RPMs up, departure horn.
SLOW BELOW 1/3 THROTTLE
- Horn arrival signal. "We are
arriving,"/ "Roger."
16
THROTTLE UP TO STEP
2+ - Bell on. "Train is
moving."/"Copy.".
1/8 THROTTLE -
Bell off.
1/3 THROTTLE
- Horn signal (in
transit.).
3/4 THROTTLE - Crossing
signal "We are at
maximum authorized
speed.".

Advertisement

Table of Contents
loading

Table of Contents