Canon imageRUNNER 1019 Series Basic Operation Manual page 246

SYSTEM SETTINGS
6. COMMUNICATIONS
1. E-MAIL/I-FAX
1. MAX TX DATA SIZE
2. DIVIDED OVER MAX
2. FAX SETTINGS
1. TX START SPEED
2. RX START SPEED
3. MEMORY LOCK
OFF
ON
1. PASSWORD
2. REPORT PRINT
14-49
Sets the fax, e-mail, and I-fax communication.
Sets the e-mail/I-fax communications.
Sets the maximum data size for outgoing e-mail messages
and I-fax documents. If the e-mail message exceeds this
data size limit, it is split up into several e-mail messages
before being sent. However, if an I-fax transmission exceeds
the data size limit, it is handled as an error, and it is not sent.
(0 to 99 MB)
Sets whether to divide a document into separate files when
it is sent if its size exceeds the data size you specify.
– OFF
– ON
Sets the facsimile communication.
Sets the transmission start speed for faxes.
(33600bps, 2400bps, 4800bps, 7200bps, 9600bps,
14400bps)
Sets the reception start speed for faxes. (33600bps,
2400bps, 4800bps, 7200bps, 9600bps, 14400bps)
Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 1, "Advanced
Send Features," in the Advanced Operation Guide.)
Disables memory reception.
Enables memory reception.
Registers the password that protects the authority for
accessing to memory.
Sets whether to print a report on memory reception.
– OFF
– ON