TX/RX SETTINGS
5. DIALING LINE CHCK
3. RX SETTINGS
1. ECM RX
2. RX MODE
3. FAX/TEL OPT. SET
1. RING START
TIME
2. F/T RING TIME
3. F/T SWITCH
ACTION
Sets whether to check the telephone line condition.
– OFF
– ON
Sets the reception features.
Sets whether the ECM (Error Correction Mode) reception is
activated.
– ON
– OFF
Selects the receive mode. (See "Set the Machine for
Receiving Faxes," in the Quick Start Guide.)
– FaxOnly
– FaxTel
– AnsMode
– DRPD
– Manual
Sets the optional items in the <FaxTel> mode. (See
Chapter 1, "Advanced Send Features," in the Advanced
Operation Guide.)
Sets the time the machine takes to check whether a call is a
fax or a voice call. (0SEC–30SEC)
Selects the ring length for voice calls. (15SEC–300SEC)
Selects whether the machine switches to the receive mode
after the ring time has elapsed, or whether if disconnects the
call.
– RECEIVE
– DISCONNECT
14-18