Canon imageRUNNER 1019 Series Basic Operation Manual page 185

Message
PLATEN GLASS DIRTY
CLEAN PLATEN GLASS
RECEIVED IN MEMORY
START AGAIN
STOP KEY PRESSED
PRESS OK KEY
Description
The ADF scanning area on
the left side of the platen
glass may be dirty.
The machine received the
fax/I-fax in memory because
paper or toner ran out, paper
jams occurred, or incorrect-
size paper was loaded.
– A transmission error
occurred because the line
condition was poor.
– The paper jammed or ran
out during printing a
report.
[Stop] has been pressed
while scanning the
document using the ADF.
Action
Clean the ADF scanning
area, then press [OK].
Load the correct-size paper
in the paper drawer, replace
the toner cartridge, or clear
the paper jams. For more
information, see the
following:
"Setting Paper Type and
Size," on p. 3-8
"Replacing the Toner
Cartridge," on p. 12-9
"Clearing Jams," on p. 13-1
– Check the line condition,
then try again.
– Clear the paper jam, or
replenish the paper, then
try again.
Press [OK], then set the
document again.
13-10