Adjust./Cleaning - Canon imageRUNNER 1019 Series Basic Operation Manual

ADJUST./CLEANING

Setting Item
1. TRANS. ROLR CLEAN
2. DRUM CLEANING
3. FIX.UNIT CLEANING
4. FEEDER CLEANING
5. SPECIAL MODE M
MID
LOW
HIGH
6. SPECIAL MODE N
7. SPECIAL MODE P
14-35
Cleans the transcription roller. (See "Transcription Roller," on
p. 12-7.)
Cleans the drum. (See "Drum Unit," on p. 12-8.)
Cleans the fuser roller. (See "Fuser Roller," on p. 12-2.)
Cleans the ADF. (See "Cleaning the ADF Automatically," on
p. 12-6.)
Sets to improve print quality or fix irregular print density. If
print quality decreases or an irregularity in the print density
appears, transcription output may not function adequately.
Selects in normal conditions.
Selects to compensate for poor print quality that occurs
when using paper that was stored for a long time at high
temperatures and high humidity.
Selects to compensate for poor quality that occurs when
using heavyweight paper.
When the two-sided printing function is used, paper may curl
severely or become jammed. Enable this setting to prevent
paper curling or jamming.
– OFF
– ON
Sets to activate when lightweight paper or paper which is
easy to get uneven print density is used for printing.
– OFF
– ON
Description