Canon imageRUNNER 1019 Series Basic Operation Manual page 216

TX/RX SETTINGS
4. DRPD:SELECT FAX
5. INCOMING RING
OFF
ON
RING COUNT
6. REMOTE RX
ON
REMOTE RX ID
OFF
14-19
Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– NORMAL RING
Sets whether the external telephone rings when the
machine receives a voice call or fax, enabling you to answer
the voice call. This function is only available when the <RX
MODE> is set to <FaxOnly> or <FaxTel>.
The telephone does not ring when the machine receives a
voice call or fax. (In the Sleep mode, the telephone may ring
one or two times, if <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>.)
The telephone rings when the machine receives a voice call
or fax if an external telephone is connected.
Sets the number of incoming rings before the machine
answers. (1TIMES–99TIMES)
Sets whether to use remote receiving. (See Chapter 1,
"Advanced Send Features," in the Advanced Operation
Guide.)
The machine enables remote receiving.
You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
The machine disables remote receiving.