note
The Picture-in-Picture
function does not work for
RGB video images.
Using the Remote Control
38
Zooming Part of Your Image
You can zoom in on a portion of the image using the
on the remote control.
1. Press the
E-Zoom
You see a crosshair indicating the center of the zoom-in area.
2. Use the
pointer button to position the crosshair.
3. Continue pressing the
area up to 4 times.
4. While the image is enlarged, you can:
Use the
pointer button to move around the screen.
Press the
E-Zoom
5. When done, press the
original size.
Displaying a Picture-in-Picture Video
If you're displaying an image from equipment connected to
the
port(s), you can open up a smaller picture-in-picture
Computer
window on the screen. This window can display video from
equipment connected to either the
Setting Up the Picture-in-Picture Image
Before starting, make sure the computer or video equipment for your
main image is connected to the
equipment for the picture-in-picture window is connected to the
or
port. Then select the corresponding video setting:
Video
S-Video
1. Press the
button on the remote control and enter the
Menu
menu.
Setting
2. Highlight
P in P Options
button to select
Subscreen Image
pointer to choose
Video
3. Press
to exit the menu system.
Menu
button on the remote control.
button to enlarge the selected
E-Zoom
button to zoom out.
button to return the image to its
E
SC
or
Video
S-Video
port(s), and the video
Computer
and press
, then use the pointer
Enter
and press
or
, then press
S-Video
buttons
E-Zoom
port.
. Use the
Enter
.
Enter