Using Quick Setup
You can use the
Quick Setup
control to quickly and automatically set up the projector's focus,
zoom, and shape, as well as the Wall Shot setting. All you need to do is
position your projector, then press
enable Quick Setup for all of the settings you want to use as described
on page 76.
Focusing and Zooming Your Image
Use the
buttons on the projector or remote to sharpen the
Focus
image.
Use the
buttons on the projector or remote to reduce or enlarge
Zoom
the image. Press the
W
button on the remote to increase the size, and the
projector or bottom zoom button on the remote to decrease it.
Focus
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a portion of the image.
See page 38 for instructions.
button on the projector or the remote
Quick Setup
Quick Setup
button on the projector or the top zoom
. Make sure you
button on the
T
Zoom
E-Zoom
Displaying and Adjusting the Image
25