Selecting The Image Source - Epson PowerLite 830p User Manual

note
To focus and adjust the
image, see page 24. If a
projected image fails to
appear, see page 21 for help.
note
You can also preview all
sources on one screen to help
you select the desired source
(see page 35).
Displaying and Adjusting the Image
20

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don't see the image you want, press the
on the remote control or the projector.
You can also select your image using the
projector or the remote control as follows:
The projector has two
Computer/Component
connected to the
Computer/Component
Use the
Video/S-Video
connected to the
Video
The remote control has four source buttons. Use them to switch
between devices connected to the ports identified on each button.
The PowerLite 830p does not support EasyMP.
You can also press the
Source Search
remote repeatedly until you see the image you want to project on the
screen.
Source Search
buttons either on the
Source
buttons. Use the
Source
button to switch between equipment
ports.
button to switch between equipment
and ports.
S-Video
button on the projector or the
button
TM