Cleaning The Projector Case; Cleaning The Air Filters And Vents - Epson PowerLite 830p User Manual

caution
Do not use wax, alcohol,
benzene, thinner, or other
chemical detergents. These
can damage the case.
note
To order replacement air
filters, request part number
V13H134A07. See page 13
for ordering information.
Maintaining the Projector
96

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power
cord.
To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.
Follow these steps:
1. Turn off the projector. Wait for the Power light to stop flashing,
then unplug the power cord.
2. To clean the intake vents, use a small vacuum cleaner designed for
computers and other office equipment. If you don't have one,
gently clean the vents with a soft brush (such as an artist's
paintbrush).