IBM eServer 342 xSeries Installation Manual page 29

Note: The illustrations in this document might differ slightly from your hardware.
To install a DIMM:
1. Review the information in "Safety" on page v.
2. Turn off the server and peripheral devices and disconnect all external cables and
power cords.
3. Remove the cover.
4. Install the DIMM:
a. Carefully rotate the retaining clips away from the connector and into the open
position.
DIMM 1
DIMM 3
DIMM 2
DIMM 4
DIMM 1
DIMM 2
DIMM connector 4 (J4)
DIMM connector 3 (J3)
DIMM connector 2 (J2)
DIMM connector 1 (J1)
Chapter 2. Installing options
17