IBM eServer 342 xSeries Installation Manual page 26

11. Press down and latch the spring retention clip on the back of the fan sink (the side
12. Press down and latch the spring retention clip on the front of the fan sink (the side
13. Plug the fan sink into the fan sink connector on the system board (J46). Make
14. Reinstall the air baffle and the fan assembly.
15. If you have other options to install, install them now. Otherwise, install the cover
14
IBM xSeries 342: Installation Guide
Make sure the fan sink guide fits between the processor and the processor
socket.
Fan sink guide
facing the back of the server).
facing the front of the server).
sure the cable is not in a position to interfere with the fan sink operation.
and proceed to "Cabling the server" on page 19.
Spring retention clip