Dock
Serial Communications
User's Guide
Data is lost
•
Turn the unit off and wait for the "Powering Down" screen to disap-
pear before replacing batteries.
•
Never leave the unit for an extended period of time without a main
battery pack.
Unit turns off unexpectedly and won't turn on
•
The battery is likely too weak to continue operating the unit.
Replace the main battery pack with a fully charged battery and then
turn the unit on.
The Ready light does not come on
•
Make sure the
Power
•
Make sure the Falcon is fully inserted into the dock, with the keypad
facing out.
The Ready light still does not come on
•
Make sure the Falcon Dock adapter is securely attached to the Fal-
con.
•
Make sure the contacts in the dock are clean. (If a power adapter is
not being used, the light will not come on.)
Data transfer doesn't succeed
•
Do communications parameters agree (COM port, baud rate, trans-
fer protocol)?
•
Is the cable designed for use with the Falcon (PSC-specific RJ cable)
or the dock (25-pin null modem cable)?
•
Is there disk drive space available on the receiver for the file being
sent? If not, delete unnecessary files.
light is on.
Troubleshooting
83