Overview; Power Supply - PSC Falcon 310 User Manual

The Falcon Vehicle Mount Powered Dock

Overview

NOTE
CAUTION

Power Supply

72
The Vehicle Mount Powered Dock is designed for road vehicles such as
step vans or semi tractors and forklifts using the optional mounting
bracket. The mounting configuration is flexible to respond to the variety
of vehicle configurations and personal driver preferences.
• The Falcon
31X
Mount Powered Dock.
• The Vehicle Mount Powered Dock also functions with the Falcon
with or without an integrated laser.
32X
PSC offers a standard mounting bracket that provides vibration isolation
(recommended for forklifts), however a custom bracket or off-the-shelf
cell phone mounting equipment can also be used.
There is also a Vehicle Mount Dock (without power) available for the Falcon
31X and 32X (PSC part number 00-445-00).
The vehicle-mounted dock holds the Falcon
above. The powered docking station has two primary uses:
1. Recharge the NiMH battery pack(s) and lithium backup batteries.
2. Provide a connection for serial communications between the Falcon
and the host computer or another serial device, such as a printer or
modem.
If the Falcon contains Alkaline or non-rechargeable batteries, do not con-
nect the power supply to the dock.
AC Power supplies are available that meet either 110V - 120V or 200V -
240V. The Vehicle Mount Powered Dock requires a DC power source
within the range of 11 V to 16.5 V.
without an integrated laser functions in the Vehicle
Falcon
and as specified
31X 32X
®
DOS Portable Terminals