Replacing The Pistol Grip With The Hand-Strap - PSC Falcon 310 User Manual

Replacing the Pistol Grip with the Hand-Strap

User's Guide
To remove the pistol grip on the Falcon
complete the following steps:
1. Turn the Falcon off.
2. Remove the screws located just above the battery cover's latch dials.
3. Grasp the pistol grip and lift the grip out of its seat on the Falcon.
To replace the pistol grip on the Falcon
) complete the following steps:
Figure 8 on page 19
1. Insert the top tab of the hand-strap cover into the slot at the top of
the pistol grip recess.
Figure 8. Replacing the Pistol Grip with a Hand-Strap
Screws
Washers
Pistol Grip Cover
Removing the Pistol Grip
(refer to
34X
Figure 7 on page 18
with its hand-strap (refer to
34X
Hand Strap Clip
Hand Strap
Battery Cover
Dials
Laser
)
19