Icons And Input Modes - PSC Falcon 310 User Manual

Falcon Keypads

Icons and Input Modes

40
Table 18: Standard Keys not found on a 48-key Falcon
Standard Keys not found on a Falcon 48-key keypad
<F11> Left <Shift>*
<F12> <Caps Lock>*
<Tab> Left Brace <}>
<End> Right <Alt>
<Home> <Pg Up>
* The Falcon's <Caps>
keyboard the <Shift> key also provides these functions.
** The 48-key keyboard has a
*** The 48-key keyboard has a
The Falcon 48-key
33x
keyboard. These keys are shown in
Table 19: Falcon 34X 48-Key Keypad Unique Keys
Key
<Caps> When pressed and released, toggles Caps mode on and off;
when held down, acts equivalently to the
standard computer keyboard.
<Contrast Up> Increased contrast in the viewport.
<Contrast Down> Decreases contrast in the viewport.
<Fn> Ouputs the symbol or activates the function (<F1>-<F10>) keys
above the number keys.
<Shift> Acts like a shift on a conventional keyboard. Used to access
symbol characters over the number keys
<Break> Performs a
<PrtScr> Prints screen to parallel port.
<Lamp> Turns the backlight on and off in the viewport.
<Power> Turns the Falcon on and off.
<PAN LK> <Fn>+<S>
can then be used to effect panning (keys <F1>, <F2>, <F4>,
and <F5>); use the panning toggle key (<S>) to exit paning
mode and return the screen to cursor mode.
During operations that require use of a disk drive, a disk icon (shown at
left) appears on the right side of the viewport. This indicates that the unit
is busy. Wait until the icon disappears before continuing to use the unit.
<Num Lock>
<Pause/Break>
Right Brace <{>
<Print Screen>/
<SysReq>
key provides the functions of these keys. On the 48-key 34X
<BREAK> key that performs a
<PRT SCR> key that performs a print screen.
and have some keys that are not found on a PC
34x
.
Table 19
Default Use
<Ctrl>-<Break>
toggles the viewport mode on or off; the arrow keys
Falcon
<Scroll Lock>
Right <Ctrl>
<Pg Down>
Grey Numeric
Number Keys
<Ctrl><Break>
<Shift> key on a
when pressed.
®
DOS Portable Terminals