Icons And Input Modes - PSC Falcon 310 User Manual

Falcon Keypads

Icons and Input Modes

36
Key
Viewport <Fn>+<5>
Panning Mode arrow keys can be used to effect panning (keys <2>, <4>, <6>,
and <8>); use the panning toggle key (key <5>) to exit paning
mode and return the screen to cursor mode.
* For information about reprogramming triggers, refer to the Falcon DOS Portable
Data Terminal Advanced User's Guide.
During operations that require use of a disk drive, a disk icon (shown at
left) appears on the right side of the viewport. This indicates that the unit
is busy. Wait until the icon disappears before continuing to use the unit.
The current input mode determines key functions on the Falcon
input modes and the corresponding icons are described in
located along the right side of the viewport indicate the current input
mode.
Table 16: 38-Key Sequences, Input Modes, and Icons
Input Mode/
Icons
Key Sequence
Type 1—Remains in effect after each keypress until discontinued by user.
Normal N/A
<Caps>
Type 2—Affects only a single keypress or combination of key presses.
Function <Fn>
Control <Ctrl>
Alternate
<Alt>
International
<Intl>
Viewport
Panning
Default Use
toggles the viewport panning mode on or off; the
Result of Keypress
Outputs letter (lowercase), number, or function on the key.
Outputs uppercase letter on the key.
Outputs the symbol or function above the key.
Outputs the control meaning for alphanumeric.
Outputs the alternate meaning for alphanumeric or
function keys.
Outputs a character from the international character set
(page 38).
Puts the unit into viewport panning mode.
Falcon
33x
. Icons
Table 16
®
DOS Portable Terminals
. The