Double Action Key Mode
User's Guide
There are two additional modes of operation which affect how alphabetic
and punctuation characters above the keys are accessed with Falcon 25-key
units.
•
Thirteen of these keys are used for alpha characters (
•
Each key has a character on the key, and two characters above the
key.
•
Use the
key with Double-Action typing to access the charac-
<Fn>
ters above the keys.
•
Access the characters above the keys depends upon the
key mode (
Double Strike
Using the <Fn> (Alpha) Key
To access the second character above a key:
•
Press the
<Fn>
•
Use the
Double-Action
mode is used only in the
Double-Action
Double Strike Mode
Left character:
Press the numeric key below the appropriate alpha or
punctuations symbol once and release. After a time-out (the default is 330
ms), the left alpha or punctuation symbol is displayed.
Right character:
Quickly press the numeric key below the appropriate
alpha or punctuation symbol key twice. The second key press must occur
before the time-out (default = 330 ms).
This mode is called the
presses on a key to access the second (the right-most) character.
Press and Wait Mode
Left character:
Press an
Right character:
Press the
time-out (default = 330 ms).
or
Press and Wait
key
mode to type the second character.
<Fn
mode, because it requires two rapid
double strike
key once and release
<Alpha>
key and hold for a predetermined
<Alpha>
Falcon 33x/34x 25-Key Keypad
.
A-Z)
double action
).
> (Alpha) state.
33