Key Keypad - PSC Falcon 310 User Manual

User's Guide
There is a difference in the way the Falcon 32X models and the Falcon 33X
and 34X function when exiting panning mode. On the Falcons 33X and 34X,
when the <FN>+<5>
the <FN> state is not. Pressing the
A
results in the letter " " being displayed in the viewport.

25-Key Keypad

Figure 18: Falcon 33x/34x Cursor Key Locations (25-Key)
1. To initiate panning
This action toggles the viewport panning mode on or off.
2. When viewport panning is initiated, the panning icon (
played along the right side of the LCD.
3. Use the arrow keys (refer to
to the left, or to the right while in panning mode.
4. To exit panning mode, press the
snaps back to the cursor. No character is displayed in this case.
It is not necessary to press
order to exit the panning mode. If any other key is pressed (besides the
<arrow> key or the <Lamp>
back to the cursor, and displays the pressed character (if applicable).
keys are pressed, panning mode is still active, but
<A> alpha key to exit panning mode
:
mode, type
<LAMP>
) to move the display up, down,
Figure 18
<LAMP>
<Fn> to activate the
key), the Falcon exits panning mode, snaps
Moving the Viewport Display
while in Alpha mode.
) is dis-
key. Upon exit, the screen
Panning Toggle key in
47