Turning The Falcon On And Off; First-Time Use; Please Wait" Messages - PSC Falcon 310 User Manual

Falcon Basics

Turning the Falcon On and Off

First-Time Use

"Please Wait" Messages

10
Press the key to turn the unit on or off.
<Power>
• The key (
<Power>
at the top left of the keypad.
• The key (
<Power>
at the bottom left of the keypad.
The first time the Falcon is turned on, this message may appear:
Initial power-up or
critical data loss.
Drive D formatted.
Press any key...
The message appears with normal operation and does not indicate a prob-
lem. Press the
<ENTER>
This message will also appear when new or recharged batteries are placed in
the unit after the backup battery has been drained.
The Falcon performs the operations specified by the type of PC card
installed.
• During these operations, the unit displays a message in reverse video
indicating that it is powering on or off.
• When turning the unit on, wait until the message disappears before
using the unit.
• When turning the unit off, to replace the batteries, wait until the
message disappears before removing the batteries.
) for Falcon models
) for Falcon models
key to continue booting up.
®
Falcon
and is located
31X 32X
and is located
33X 34X
DOS Portable Terminals