The Laser Module - PSC Falcon 310 User Manual

The Laser Module

User's Guide
• Repeat to return to the default settings.
To swap the trigger operations in the Falcon
• Press the
<FN>
• Repeat to return to the default settings.
The Falcon and
33X 34X
elliptical key in the center of the top row on the keypad matrix. This key
cannot be reprogrammed. This key is not present on a 48-key keypad.
Normally, the laser window faces the left side of the Falcon for easy right-
handed scanning. Rotate the laser module to hold the Falcon in the left
hand while scanning.
Figure 20: Falcon 31x/32x Rotating the Laser Module
Laser module
1.
Loosen the
screw.
2.
Gently lift the
laser module
up from the
main unit.
3.
Rotate the
module 180°.
4.
Reattach the
module to the
main unit.
5.
Tighten the
screw.
To rotate the laser module, complete the following steps:
1. Loosen the screw that secures the module to the main part of the
Falcon (refer to
key, and then press the
have only one Laser
Screw
).
Figure 20
The Laser Module
:
32X
key
<SWP>
key. It is the large
<Scan>
53