Mounting Bracket; Bottom Mounting Bracket - PSC Falcon 310 User Manual

NOTE

Mounting Bracket

Bottom Mounting Bracket

User's Guide
PSC recommends the Falcon be inserted in the dock only after the dock is
securely mounted to a vehicle.
Complete the following instructions for the PSC Powered Dock Mount-
ing bracket:
1. Assemble the mounting bracket.
2. Install the mounting bracket on a stable, flat surface. Use the Pow-
ered Dock mounting bracket or an equivalent mounting assembly.
3. Insert the Falcon in the dock bracket assembly.
4. Connect the power source to the dock.
5. The Dock Power LED illuminates.
6. Turn the Falcon on.
shows the mounting pattern for a standard mount. Refer to
Figure 29
for the mounting pattern if using a custom mount.
Figure 32
1. Install the Bottom Mounting Bracket portion of the mounting
assembly to the vehicle using ¼" (6.35mm) maximum diameter fas-
teners. Refer to .
Figure 30
Installation
75