Chapter 4
Hardware Diagnostics
HW Diagnostics consists of diagnostic tests for the server's hardware devices. You can
select a single device or a combination of devices to test.
Use the HW Diagnostics Program to:
Check for normal server operation
Check for normal operation of optional devices
Diagnose failures
Not all failures can be detected by the HW Diagnostics Program. You can also use the
System Setup Utilities and check the error log for problems detected by the system
board.
NOTE: The HW Diagnostics program is on the SST CD and can be created by
selecting the Create Floppy Disk option.
If the server is running, shut it down and turn it off.
1
Turn on the server.
As the system boots, highlight "HW Diagnostics" or press 2 to start the HW
Diagnostics Program.
115