Table of Contents
Advertisement
Connecting Hardware Devices
5
Partially position the device in the empty device bay slot, and then connect the
power and signal cables.
Connecting the power and signal cables
NOTE: Verify pin locations using the device's documentation manual.
6
Slide the device into the device bay slot until the rail latches click, indicating that the
device is locked into position.
Locking the SCSI device into position
7
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 10 in
53.
SCSI devices
Maintenance overview
79
on page
Advertisement
Table of Contents
