Table of Contents
Advertisement
Getting Started
Removing the top panel (rack models)
Follow these steps to remove the top panel:
1
Shut down the server, turn off the power, and unplug the power cable.
2
Unplug the display cable, keyboard cable, and others as appropriate.
3
Loosen the 2 screws securing the server to the rack.
4
Grasp the handles on the server's front panel, and carefully slide the server from the
rack until the rail latches lock the server in its fully-extended position.
Pulling out the server (rack model)
5
Turn the side panel lock to release the lock.
6
Slide the top panel towards the rear of the server to remove it.
Replacing the top panel (rack models)
Follow these steps to replace the top panel:
1
Carefully slide the top panel onto the server.
2
Turn the side panel lock to the locking position.
3
Press the rail latches inward to release the server from its locked position, then slide
the server into the rack.
4
Tighten the two screws to secure it.
5
Plug in all cables.
6
Plug in the power cable.
Removing and replacing the server panels
33
Advertisement
Table of Contents
