Electronic Speed Control - Dodge Charger 2016 User Manual

O P E R A T I N G Y O U R V E H I C L E

ELECTRONIC SPEED CONTROL

When engaged, the Electronic Speed Control takes over accelerator operations at speeds
greater than 25 mph (40 km/h).
The Electronic Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the
Electronic Speed Control System has been
designed to shut down if multiple Speed
Control functions are operated at the same
time. If this occurs, the Electronic Speed
Control System can be reactivated by push-
ing the Electronic Speed Control ON/OFF
button and resetting the desired vehicle set
speed.
To Activate
Push the ON/OFF button to activate the
electronic speed control. CRUISE CON-
TROL READY will appear on the instrument
cluster to indicate the electronic speed con-
trol is on. To turn the system off, push the
ON/OFF button a second time. CRUISE
CONTROL OFF will appear on the instru-
ment cluster to indicate the electronic
speed control is off. The system should be
turned off when not in use.
Leaving the Electronic Speed Control system on when not in use is dangerous. You
could accidentally set the system or cause it to go faster than you want. You could lose
control and have an accident. Always leave the system OFF when you are not using it.
To Set A Desired Speed
Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed,
push the SET (+) or SET (-) button and release. Release the accelerator and the vehicle
will operate at the selected speed. Once a speed has been set a message CRUISE
CONTROL SET TO MPH (km/h) will appear indicating what speed was set. A CRUISE
indicator lamp, along with set speed will also appear and stay on in the instrument cluster
when the speed is set.
52
Electronic Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel
WARNING!