Table of Contents
Advertisement
W H A T T O D O I N E M E R G E N C I E S
1. Remove the spare tire, jack, and lug wrench.
2. The spare tire must be used for the rear wheel(s) only. For a flat front tire, move the rear
tire to the front and use the spare tire on the rear.
3. If equipped with aluminum wheels
where the center cap covers the lug
nuts, use the lug wrench to pry the
center cap off carefully before raising
the vehicle.
4. Before raising the vehicle, use the lug
wrench to loosen, but not remove, the
lug nuts on the wheel with the flat tire.
Turn the lug nuts counterclockwise one
turn while the wheel is still on the
ground.
5. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle with the lift area of the sill flange.
170
Spare Tire Label
Advertisement
Table of Contents
