Table of Contents
Advertisement
E L E C T R O N I C S
1/8 Mile (200 Meters)
When selected, this screen displays the time it takes the vehicle to travel 1/8 mile within
15 seconds and the vehicle's speed when it reaches 1/8 mile.
• The feature will "ready" when the vehicle is at 0 mph (0 km/h). The word "READY" will
flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 1/8 mile (200 meters) in less then 15
seconds.
• To clear the vehicle's best 1/8 mile (200 meters) run, push and hold the OK button for
five seconds.
1/4 Mile (400 Meters)
When selected, this screen displays the time it takes the vehicle to travel 1/4 mile within
25 seconds and the vehicle's speed when it reaches 1/4 mile (400 meters).
• The feature will "ready" when the vehicle is at 0 mph (0 km/h). The word "READY" will
flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 1/4 mile (400 meters) in less then 25
seconds.
• To clear the vehicle's best 1/4 mile (400 meters) run, push and hold the OK button for
two seconds.
Braking Distance
When selected, this screen displays the vehicle's braking distance, and the speed at which
the brake pedal was pushed.
• This feature will only function when applying the brakes at speeds above 30 mph
(48 km/h).
• Engaging the parking brake will disable this feature.
• The word "READY" will display when conditions are met for the event to begin.
• The distance and speed measurements display while the event is taking place.
• The distance measurement will be aborted if the brake pedal is released before the
vehicle comes to a complete stop.
• Pushing and holding the OK button will clear the current and last run values.
Current G-Force
When selected, this screen displays the current G-Force (lateral and longitudinal) that
displays the directions of the forces.
146
Advertisement
Table of Contents
