Table of Contents
Advertisement
See the following command syntax for a PCI FC-AL Adapter.
diag -c -d device_name -T "download [-s {/etc/microcode|diskette}] [-l
{latest|previous}] [-f]"
Flag
-c
-d
-T
-s
-l
-f
Download Microcode to DVD-RAM Attached to a PCI SCSI Adapter
See the following command syntax for a DVD-RAM attached to a PCI SCSI Adapter:
diag [-c] -d cdX -T "download [-s {/etc/microcode|diskette}]
[-l {latest|previous}] [-f]"
Flag
-c
cdX
-s
-l
-f
Download Microcode to Disk Attached to PCI SCSI Adapter
See following command syntax for a disk drive attached to a PCI SCSI adapter:
diag [-c] -d hdiskX -T "download [-s {/etc/microcode|diskette}]
[-l {latest|previous}] [-f]"
Flag
-c
-d hdiskX
-T download
-s
-l
-f
Download Microcode to Other Devices
See the following command syntax:
diag -c -d device_name -T "download [-s diskette] [-l previous] [-F]"
Flag
-F
-l
120
User's Guide
Description
No console mode. Run without user interaction.
Device name is the name of the adapter.
Use the download option to download microcode.
Source of the new microcode image. Default is /etc/microcode.
Level of microcode to install. The default is latest.
Force the installation even if the current level of microcode is not on the
source.
Description
No console mode. Run without user interaction
Device selected, for example, cd0.
Source of the new microcode. The default is /etc/microcode.
Level of microcode image to be installed. Latest in default
Install the microcode on the device even if the current level is unavailable on
the source.
Description
No console mode. Run without user interaction
Selected device, for example, hdisk0.
Download microcode task.
Source of the new microcode. The default is /etc/microcode.
Level of microcode image to be installed. Latest in default
Install the microcode on the device even if the current level is unavailable on
the source.
Description
Force the download microcode even if the current level is unavailable on the
source.
Microcode level. Latest is default.
Advertisement
Table of Contents
