Chapter 9. Repair Action - IBM Intellistation POWER 9112 265 User Manual

Chapter 9. Repair Action

This chapter describes the steps to replace a failing component and reset the LEDs on
the indicator panel..
1. Replace the failing component with the new component. Refer to Chapter 3 of the
IntelliStation POWER 9112 Model 265 Installation Guide for instructions.
2. Log in as root user.
3. At the command line, type diag.
4. Select Task Selection.
5. Select Log Repair Action.
6. Select the device that was repaired. (If the device is not listed, select sysplanar0)
If the Attention LED remains on after you have completed the repair action and reset
the LEDs, call for service.
157