Table of Contents
Advertisement
You can access this service aid directly from the AIX command line by typing:
/usr/lpp/diagnostics/bin/uspchrp -b
Configure Remote Maintenance Policy
The Remote Maintenance Policy includes modem configurations and phone numbers to
use for remote maintenance support. Use this service aid to display and change the
following settings for the Remote Maintenance Policy.
Note: Some of the following settings may not be displayed by this service aid.
v Configuration File for Modem on S1 Configuration File for Modem on S2
Enter the name of a modem configuration file to load on either serial port 1 (S1) or
serial port 2 (S2). The modem configuration files are located in the directory
/usr/share/modems. If a modem file is already loaded, a Modem file currently
loaded message displays.
v Modem file currently loaded on S1 Modem file currently loaded on S2
This is the name of the file that is currently loaded on serial port 1 or serial port 2.
Note: These settings are only shown when a modem file is loaded for a serial port.
v Call In Authorized on S1 (on/off) Call In Authorized on S2 (on/off)
Call In allows the Service Processor to receive a call from a remote terminal.
v Call Out Authorized on S1 (on/off) Call Out Authorized on S2 (on/off)
Call Out allows the Service Processor to place calls for maintenance.
v S1 Line Speed S2 Line Speed
A list of line speeds is available by using 'List' on the screen.
v Service Center Phone Number
Telephone number of the service center computer. The service center usually
includes a computer that takes calls from systems with call-out capability. This
computer is referred to as the catcher . The catcher expects messages in a specific
format to which the Service Processor conforms. For more information about the
format and catcher computers, refer to the README file in the AIX
/usr/samples/syscatch directory. Contact the service provider for the correct
telephone number to enter here.
v Customer Administration Center Phone Number
Telephone number of the System Administration Center computer (catcher) that
receives problem calls from systems. Contact the system administrator for the correct
telephone number to enter here.
v Digital Pager Phone Number In Event of Emergency
Number for a pager carried by someone who responds to problem calls from your
system.
v Customer Voice Phone Number
Telephone number for a telephone near the system, or answered by someone
responsible for the system. This is the telephone number left on the pager for
callback.
Chapter 6. Introducing Tasks and Service Aids
109
Advertisement
Table of Contents
