Nobles V-WD-15 Operator's Manual page 6

OPERATION
EN
8. Insert spacer through hole in pedal as shown.
Position pedal between two holes in bracket and
slide hex head screw through bracket and pedal.
Secure with washer and nut (Figure 3).
FIG. 3
9. Slide pedal between two mounting arms on back of
machine. Align and insert clevis pin through arms
and slot in pedal, secure with cotter pin (Figure 4).
FIG. 4
10. Attach squeegee assembly to bracket. Use (2)
thumb screws to secure (Figure 5).
FIG. 5
6
Home Find... Go To..
11. Connect 46 in / 117 cm vacuum hose to squeegee
assembly and on neck of machine lid (Figure 6).
FIG. 6
ACCESSORY TOOL ATTACHMENT
1. Slide 10 ft / 3m vacuum hose over neck on vacuum
lid.
2. Connect desired accessory tools to vacuum hose
(Figure 7).
FIG. 7
V- -WD- -15 / V- -WD- -57 (04- -10)