Crankshaft Transport Locking Device - MTU 16V4000R43 Operating Instructions Manual

1.4 Crankshaft transport locking device

Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10-60 Nm
Torque wrench, 60-320 Nm
Engine oil
Transport locking device
Note: The transport locking device on both sides protects the crankshaft bearings from impact and vibration
damage during engine transport.
For installation and removal of the transport locking device, follow the in-
structions below:
1. The transport locking device must remain installed on both engine sides as long as possible during en-
gine installation in order to avoid damage.
2. Prior to every engine transport, the transport locking device must be reinstalled on both engine sides
according to the instructions.
3. If the engine is to be moved together with the generator, the transport locking device for the generator
must also be installed.
4. Always use the screws supplied with or installed in the transport locking device to secure it on the en-
gine.
5. Starting or barring the engine is allowed only with the transport locking device removed. If the genera-
tor is already installed on the engine, ensure that the transport locking device of the generator is also
removed.
Removing guard plates and en-
gine supports (if applicable) on
driving end (KS)
1. Remove screws (4) om both sides and take
off with washers (3), guard plates (1) and
engine supports (2).
2. Store the removed parts of the transport
locking device carefully for any reuse.
8 | Safety | MS15042/00E 2014-10
Part No. Qty.
F30452769 1
F30452768 1