Engine Oil – Change - MTU 16V4000R43 Operating Instructions Manual

7.14.2 Engine oil – Change
Preconditions
☑Engine is stopped and starting disabled.
☑Engine is at operating temperature.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 60-320 Nm
Ratchet
Engine oil
Sealing ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Version without semirotary hand pump: Draining oil at drain plug(s) on oil pan
1. Provide a suitable container in which to collect the engine oil.
2. Remove drain plug(s) and drain engine oil.
3. Install drain plug(s) with new sealing ring.
Version with semirotary hand pump: Extracting the engine oil
1. Provide a suitable container in which to collect the engine oil.
2. Extract all engine oil from oil pan using the semirotary hand pump.
Engine oil treatment
1. Check layer thickness of the oil residue, clean out and replace filter sleeve (→ Page 124).
2. Replace engine oil filter (→ Page 121).
118 | Task Description | MS15042/00E 2014-10
Part No.
F30452768
F30027341
(→ Spare Parts Catalog)
Qty.
1
1