MTU 16V4000R43 Operating Instructions Manual page 97

9. Coat bolt mating face (2) and thread with
engine oil.
10. Fit hold-down clamp (1) in the correct position and use torque wrench to tighten screw (2) to the speci-
fied initial tightening torque.
Name
Screw
Note: Ensure special cleanness.
11. Coat thread and sealing cone of adapter (3) with engine oil.
12. Install adapter (3) and use torque wrench to tighten to the specified initial tightening torque.
Name
Adapter
13. Tighten screw (2) with torque wrench to the specified tightening torque.
Name
Screw
14. Tighten adapter (3) with torque wrench to the specified tightening torque.
Name
Adapter
Note: Ensure special cleanness.
15. Coat thread and sealing cone of HP line (5) with engine oil.
16. Mount double-walled HP line (5) and use torque wrench to tighten to the specified torque. Tightening
sequence:
1 Adapter (4)
2 Rail (6)
Name
Union nut / thrust
screw
Size Type
M12 Preload torque
Size Type
Preload torque
Size Type
M12 Tightening torque
Size Type
Tightening torque
Size Type
Tightening torque
Lubricant
(Engine oil)
Lubricant
(Engine oil)
Lubricant
(Engine oil)
Lubricant
(Engine oil)
Lubricant
(Engine oil)
MS15042/00E 2014-10 | Task Description | 97
Value/Standard
5 Nm to 10 Nm
Value/Standard
5 Nm to 10 Nm
Value/Standard
100 Nm + 10 Nm
Value/Standard
100 Nm + 10 Nm
Value/Standard
40 Nm + 5 Nm