After adjusting the minutes and after last confirmation by the SET button, the clock time and
date is set.
Automatic synchronisation is made every night!
12/24 clock format
The clock time may be displayed in the 12hour format (AM/PM) or 24hour format; you may
switch between the formats by pressing "UP" button once.
Displayed weather conditions
The weather conditions are identified on the basis of calculated average of several values trans-
mitted by the sensor that cannot be influenced. The following 4 indicators of weather conditions
will appear:
See the picture in the text:
Displayed temperature value
The indoor temperature may be displayed either in the degrees of Celsius or Fahrenheit; you
may switch between the degree units by pressing the "UP" button.
Channel
The main unit may be connected to up 3 sensors. Please pay attention to set the channel to 2 or
3 in case of additional sensors. You may switch between the sensor temperature indications by
the "CHANNEL" button.
1. Sunny
2. Slightly cloudy
3. Cloudy
4. Rainy
EN - 21
EN