Mounting Instructions; Ceiling/Wall Mounting - Watchguard AP300 Hardware Manual

Hardware Specifications

Mounting Instructions

All of the items necessary to install your WatchGuard AP device are included in the package.
Items needed to mount an AP300 device

Ceiling/Wall Mounting

To mount an AP300 device to a ceiling or wall:
1. Position the mounting bracket on the surface where you want to install the WatchGuard AP device.
2. Use the mounting bracket as a guide to mark the position of the WatchGuard AP device and the
locations of the two drill holes on the mounting surface.
3. Use a 4.75mm (3/16") drill bit to drill holes approximately 25mm (1") deep into the mounting surface.
8 WatchGuard AP300