Table of Contents
Advertisement
4. Remove the mounting bracket and insert the large mounting screws into the holes you made on the
mounting surface.
5. Insert the long 5x32 screws through the bracket and into the mounting screws.
6. Insert the short 6x12 screws partway into the bottom of the AP device. Do not tighten the screws
completely. Keep the heads of the screws exposed to attach the device to the mounting bracket. If
extra space is required between the device and the mounting bracket, use the spacers and long 6x25
screws from the T-rail mounting hardware kit.
7. To attach the AP device to the mounting bracket, insert the screw heads from the AP device into the
slots in the mounting bracket, and rotate the device clockwise to lock the device in place.
Hardware Guide
Hardware Specifications
9
Advertisement
Table of Contents
