Ac Power Adapter - Watchguard AP300 Hardware Manual

Indicator

AC Power Adapter

An optional AC power adapter supplies 12V DC power to the WatchGuard AP and includes US, EU, UK, and AU
region-specific adapter disk plugs.
To connect a region-specific disk plug to the AC power adapter:
1. Insert the round disk plug in the AC power adapter at an angle to align with the slots.
2. Rotate the disk clockwise until it clicks into position.
To remove a disk plug from the AC power adapter:
1. Press the Push button on the round disk plug.
2. Rotate the disk counter-clockwise and pull it away from the adapter.
AC Power Adapter Specifications
WatchGuard Part #
AC Input Voltage Rating
Output Voltage
Region-specific
Adapter Plugs
Temperature
Humidity
Dimensions
Hardware Guide
Indicator color
Green flashing
Green flashing
alternating with Wireless
LED flashing
Green flashing slowly
Green
AC Power Adaptor
WG8588
100 to 240VAC
DC12V, 1250mA
US, EU, UK, AU
Operating: 0 to +40°C
Storage: -20 to +70°C
Operating: 75%
Storage: 95%
L = 70mm (3.15in)
W = 39mm (1.77in)
H = 33.7mm (1.29in)
Interface Status
Device booting
Power on and ready to pair
Firmware upgrade in progress
Power on and paired
Hardware Specifications
5