Dash-Mounted Controls - freightliner WALK-IN VAN CHASSIS Operator's Manual

in 10 minutes, or longer depending on internal
pressure.
Tilt/Telescope Steering Column
Lever Adjustment (optional)
To change the position of the steering wheel, pull the
lever upward and move the steering wheel to the de-
sired position. See Fig.
lock the position. The steering wheel can be tilted up
to provide easier exit and reentry.
1
10/12/2007
1. Tilt/Telescope Lever
Fig. 3.10, Tilt/Telescope Steering Column with Lever
Adjustment
If the chassis is equipped with a telescoping steering
column, push the lever down and extend or retract
the steering wheel as desired.
Foot Pedal Adjustment (optional)
If the tilt/telescope steering column is equipped with
a foot pedal adjustment, depress the foot pedal to
move the steering column to the desired position.
Release the foot pedal to lock the position. See
Fig. 3.11.
3.10. Release the lever to
f462115
05/11/2005
1. Tilt/Telescope Foot Pedal
Fig. 3.11, Tilt/Telescope Steering Column with Foot
Pedal Adjustment

Dash-Mounted Controls

Aftertreatment System (ATS) Regen
Switch
03/09/2012
Fig. 3.12, ATS Regen Switch
A regen switch is located on or under the dash with
which the driver can control two states. See
Fig. 3.12. These include:
•
Request regeneration
•
Default (automatic regeneration)
Controls
1
f462016
f610848
3.6