freightliner WALK-IN VAN CHASSIS Operator's Manual page 109

Note 5:
Screen Z scrolls to display the
following items:
ENGINE FAULTS
TRANSMISSION FAULTS
ABS FAULTS
CHECK OUTPUTS
CHECK DATA INPUTS
ODOMETER DIAGNOSTICS
CHECK GAUGES
CHECK WARNING LAMPS
CHECK LCD
CHECK BINARY INPUTS
CHECK ANALOG INPUTS
CHECK DATA LINK
VERSION INFORMATION
EXIT
The text DIAGNOSTIC MENU
remains fixed on the first line.
(Right & Exit
highlighted)
Screen AE For J1587
09/23/2009
display center is referred to as screen C in
Fig. 15.13.
1. With the vehicle in park, turn the ignition to RUN,
and allow the self test to complete.
2.
Press the down toggle button to select an item to
change. The selected item will now be high-
lighted.
Diagnostics
Screens AA,AB,AC Format For J1587
Right Press
Engine Faults
Highlighted
Right Press
Trans Faults
Highlighted
Menu
Right Press
ABS Faults
Highlighted
Down Press
Highlight next Right Press
line of list.
Check Outputs
At bottom,
Highlighted
wrap to top
Right Press
Odometer Diag
Highlighted
Fig. 15.8, Diagnostic Menu Screens, Screen 1
GM Gasoline Engine
Down Press
Display Next Fault
Right Press
Down Hold
Down Press
Display Next Fault
Right Press
Down Hold
Down Press
Display Next Fault
Right Press
Down Hold
Down Press
Change to
Next Output
Right Press
Down Hold
Right Hold
Toggle Output
State Between
Off and On
Right || Hold Down
3.
Press the right toggle button once to enter the
favorites display menu, shown in
screen D.
4. Use the down toggle button to scroll through the
available items.
5. Highlight the new item, then press the right
toggle button. The selected item will now appear
in the message display center.
Menu
Or
Or Menu
Menu
Or
Or Menu
Menu
f040795
Fig. 15.13, as
15.10