Check Engine Indicator; Malfunction Indicator Lamp - freightliner WALK-IN VAN CHASSIS Operator's Manual

DISPLAY MESSAGES
Right Hold
Reset Highlighted Item
(if resettable)
Highlight CurrentLine
HighlightTimer = 5 sec.
11/23/2011

Check Engine Indicator

The amber check engine (CHECK) indicator light illu-
minates when the engine control unit senses a mal-
function in the electronic engine control system.
Stop Engine Warning
The red stop engine (STOP) warning light illuminates
if a malfunction that could cause engine damage oc-
curs. In most cases, the CHECK engine warning will
illuminate before the stop engine warning. When the
stop engine warning light illuminates, immediately
park the vehicle in a safe location and shut down the
engine. Continued operation with the stop engine
warning illuminated will lead to automatic engine
shutdown and possible engine damage.
Screen C
Selected Line 1 Data
Selected Line 2 Data
Selected Line 3 Data
Down Press
Fig. 2.11, Display Messages
Down Hold
Make No Changes
Screen D
Right Press
Highlight First Item in List
Average Fuel Economy
Gear Attained Status
Right Press
Put Data For Highlighted Item
In Display Line CurrentLine
New Warning
Message Active
WARNING
MESSAGES

Malfunction Indicator Lamp

The amber Malfunction Indicator Lamp (MIL) indi-
cates an engine emissions-related fault. See the en-
gine operators manual for details.
Engine Brake Light
A green engine brake light illuminates when the en-
gine brake is applied.
Wait to Start Warning Light
The amber wait to start indicator light illuminates with
the ignition switch in the ON position prior to engine
start-up. Do not crank the engine until the wait to
start indicator light goes out.
Instruments
Favorites Display Menu
Down Press
Move to, and Highlight,
Next Item in List
Right Hold
Park Brake On
HighlightTimer = 0
AUXILIARY
SCREENS
f040790
2.12