Warnings; Troubleshooting By Symptom - Canon PIXMA iP5300 Service Manual

Hide thumbs Also See for PIXMA iP5300:

Table of Contents

11 times

12 times

13 times

14 times

15 times

16 times

17 times

19 times

20 times

Power LED turned

off, and Alarm LED

lit

*1: Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or

EEPROM information print). If the counter value is 7% or more, also replace the Ink absorber kit (QY5-0179)

when replacing the logic board ass'y.

2-3. Warnings

Displayed warning

Low ink

Print head temperature rise

Protection of excess rise of the print head

temperature

*1: If the warning is displayed, the carriage does not move to the ink tank replacement position when the top

cover is opened.

Carriage lift mechanism error [5110] - PR lift shaft ass'y (QL2-1450)

AP position error [6A00]

Paper feed position error [6B00]

Paper feed cam sensor error [6B10]

USB Host VBUS overcurrent [9000] - Logic board ass'y (QM3-0833)

Pump roller sensor error [5C20]

Paper eject encoder error [6010]

Ink tank position sensor error [6502]

Other hardware error [6500]

ROM / RAM error

[See 3-3. Adjustment / Settings, (5) Service mode, for details.]

Status indication only.

If the print head temperature is high when the top cover is opened, the warning

is displayed

When the print head temperature falls, the warning is released.

If the print head temperature exceeds the specified limit, a Wait is inserted

during printing,

- Sheet feed unit (QM2-3902)